pkgadd - transfer software packages to the system
pkgadd [-nv] [-a admin] [-G] [ [-M] -R root_path]
[-r response] [-V fs_file]
[-d device | -d datastream pkginst | all]
[pkginst | -Y category [, category]...]
pkgadd -s [-d device | -d datastream pkginst | all]
[pkginst | -Y category [, category]...]
pkgadd transfers the contents of a software package from the distribution
medium or directory to install it onto the system. Used without the -d
device source specifier, pkgadd looks in the default spool
directory (/var/spool/pkg) for the package. Used with the -s
option, it writes the package to a spool directory instead of installing it.
The pkgadd utility requires an amount of temporary space
the size of the package that is being installed. pkgadd determines
which temporary directory to use by checking for the existence of the
$TMPDIR environment variable. If $TMPDIR is not defined,
pkgadd uses P_tmpdir from stdio.h. P_tmpdir has
a default of /var/tmp/.
Certain unbundled and third-party packages are no longer entirely
compatible with the latest version of pkgadd. These packages require
user interaction throughout the installation and not just at the very
beginning, or require that their request scripts be run as the root
To install these older packages (released prior to Solaris 2.4),
set the following environment variable: NONABI_SCRIPTS=TRUE
As long as this environment variable is set, pkgadd permits
keyboard interaction throughout the installation and package request scripts
are run as root.
If you have package request scripts that require running as user
root (instead of noaccess [the default] or user
install), use the rscript_alt parameter in the admin(4)
file to make an appropriate selection. See admin(4).
Note that, in Solaris 8 and Solaris 9, the default user when
running a request script was either root or nobody, depending
on the operating system's patch level. In the current release, the default
user is noaccess.
When running pkgadd in the global zone (see
zones(5)), a package that contains a request script (see
pkgask(1M)) is added only to the global zone. The package is not
propagated to any current or yet-to-be-installed non-global zone. This
behavior mimics the effect of the -G option, described below.
Package commands are largefile(5)-aware. They handle files
larger than 2 GB in the same way they handle smaller files. In their current
implementations, pkgadd, pkgtrans(1) and other package
commands can process a datastream of up to 4 GB.
The -d, -Y, and pkginst arguments shown in
the SYNOPSIS are described under OPERANDS, following OPTIONS.
The supported options are described as follows. The -d device
source specifier is described under OPERANDS, below.
Define an installation administration file, admin,
to be used in place of the default administration file. The token none
overrides the use of any admin file, and thus forces interaction with
the user. Unless a full path name is given, pkgadd first looks in the
current working directory for the administration file. If the specified
administration file is not in the current working directory, pkgadd
looks in the /var/sadm/install/admin directory for the administration
Add package(s) in the current zone only. When used in the
global zone, the package is added to the global zone only and is not
propagated to any existing or yet-to-be-created non-global zone. When used in
a non-global zone, the package(s) are added to the non-global zone only.
This option causes package installation to fail if, in the
pkginfo file for a package, SUNW_PKG_ALLZONES is set to true.
Instruct pkgadd not to use the
$root_path/etc/vfstab file for determining the client's
mount points. This option assumes the mount points are correct on the server
and it behaves consistently with Solaris 2.5 and earlier releases.
Installation occurs in non-interactive mode. Suppress
output of the list of installed files. The default mode is interactive.
Identify a file or directory which contains output from a
session. This file supplies the interaction
responses that would be requested by the package in interactive mode.
must be a full pathname.
Define the full path name of a directory to use as the
. All files, including package system information files, are
relocated to a directory tree starting in the specified root_path
may be specified when installing to a client from a server
(for example, /export/root/client1
The root file system of any non-global zones must not be
referenced with the -R
option. Doing so might damage the global zone's
file system, might compromise the security of the global zone, and might
damage the non-global zone's file system. See zones(5)
Write the package into the directory spool instead
of installing it.
Trace all of the scripts that get executed by
pkgadd, located in the pkginst/install directory. This
option is used for debugging the procedural and non-procedural scripts.
Specify an alternative fs_file to map the client's
file systems. For example, used in situations where the
$root_path/etc/vfstab file is non-existent or
When executed without options or operands, pkgadd uses
/var/spool/pkg (the default spool directory).
The following operands are supported:
By default, pkgadd looks in the /var/spool/pkg directory when searching
for instances of a package to install or spool. Optionally, the source for the
package instances to be installed or spooled can be specified using:
-d datastream pkgname,... | all
By default, pkgadd searches the specified source, and presents an
interactive menu allowing the user to select which package instances found on
the source are to be installed. As an alternative, the package instances to be
installed can be specified using:
Install or copy a package from device
can be any of the following:
- A full path name to a directory or the identifiers for tape, floppy disk,
or removable disk (for example, /var/tmp or
- A device alias (for example, /floppy/floppy0).
The second form of the -d
specifier, above, indicates the syntax you use
when specifying a datastream. In this case you must specify either a
comma-separated list of package names or the keyword all
The package instance or list of instances to be
installed. The token all
may be used to refer to all packages available
on the source medium. The format pkginst.*
can be used to
indicate all instances of a package.
The asterisk character (*) is a special character to some
shells and may need to be escaped. In the C-Shell, the asterisk must be
surrounded by single quotes (') or preceded by a backslash
Example 1 Installing a Package from a Solaris DVD
Install packages based on the value of the
parameter stored in the package's pkginfo(4)
packages on the source medium whose CATEGORY
matches one of the
specified categories will be selected for installation or spooling.
The following example installs a package from a Solaris DVD. You
are prompted for the name of the package you want to install.
example# pkgadd -d /cdrom/cdrom0/s0/Solaris_10/Product
Example 2 Installing a Set of Packages from a
The example command shown below installs all of the packages in
the datastream specified by the -d source specifier. Prior to this
command, this datastream must have been created with the pkgtrans(1)
example# pkgadd -d /var/tmp/datastream all
The keyword all specifies that all of the packages found in
the designated datastream will be installed.
Administration. Interaction is required. Do not use
Reboot after installation of all packages.
Reboot after installation of this package.
Location where pkgadd logs an instance of software
See attributes(5) for descriptions of the following attributes:
pkginfo(1), pkgmk(1), pkgparam(1), pkgproto(1),
pkgtrans(1), installf(1M), pkgadm(1M), pkgask(1M),
pkgchk(1M), pkgrm(1M), removef(1M), admin(4),
pkginfo(4), attributes(5), largefile(5), zones(5)
When transferring a package to a spool directory, the -r, -n, and
-a options cannot be used.
The -r option can be used to indicate a directory name as
well as a filename. The directory can contain numerous response files, each
sharing the name of the package with which it should be associated. This
would be used, for example, when adding multiple interactive packages with
one invocation of pkgadd. In this situation, each package would need
a response file. If you create response files with the same name as the
package (for example, pkinst1 and pkinst2), then name the
directory in which these files reside after the -r.
The -n option causes the installation to halt if any
interaction is needed to complete it.
If the default admin file is too restrictive, the
administration file may need to be modified to allow for total
non-interaction during a package installation. See admin(4) for