PRTDIAG(8) Maintenance Commands and Procedures PRTDIAG(8)

prtdiag - display system diagnostic information

/usr/sbin/prtdiag [-v] [-l]

prtdiag displays system configuration and diagnostic information on sun4u, sun4v, and x86 systems.

The diagnostic information lists any failed field replaceable units (FRUs) in the system.

The interface, output, and location in the directory hierarchy for prtdiag are uncommitted and subject to change in future releases.

The following options are supported:

-l

Log output. If failures or errors exist in the system, output this information to syslogd(8) only.

-v

Verbose mode. Displays the time of the most recent AC Power failure, and the most recent hardware fatal error information, and (if applicable) environmental status. The hardware fatal error information is useful to repair and manufacturing for detailed diagnostics of FRUs.

The following exit values are returned:

0

No failures or errors are detected in the system.

1

Failures or errors are detected in the system.

2

An internal prtdiag error occurred, for example, out of memory.

See attributes(7) for descriptions of the following attributes:

ATTRIBUTE TYPE ATTRIBUTE VALUE
Interface Stability Unstable*

*The output is unstable.

openprom(4D), attributes(7), modinfo(8), prtconf(8), psrinfo(8), sysdef(8), syslogd(8)

Not all diagnostic and system information is available on every platform, and therefore cannot be displayed by prtdiag. On those platforms, further information can be obtained from the System Controller.

June 13, 2019 OmniOS