IN.IKED(8) Maintenance Commands and Procedures IN.IKED(8)

in.iked - daemon for the Internet Key Exchange (IKE)

/usr/lib/inet/in.iked [-d] [-f filename] [-p level]

/usr/lib/inet/in.iked -c [-f filename]

in.iked performs automated key management for IPsec using the Internet Key Exchange (IKE) protocol.

in.iked implements the following:

IKE authentication with either pre-shared keys, DSS signatures, RSA signatures, or RSA encryption.
Diffie-Hellman key derivation using either 768, 1024, or 1536-bit public key moduli.
Authentication protection with cipher choices of AES, DES, Blowfish, or 3DES, and hash choices of either HMAC-MD5 or HMAC-SHA-1. Encryption in in.iked is limited to the IKE authentication and key exchange. See ipsecesp(4P) for information regarding IPsec protection choices.

in.iked is managed by the following smf(7) service:


This service is delivered disabled because the configuration file needs to be created before the service can be enabled. See ike.config(5) for the format of this file.

See "Service Management Facility" for information on managing the smf(7) service.

in.iked listens for incoming IKE requests from the network and for requests for outbound traffic using the PF_KEY socket. See pf_key(4P).

in.iked has two support programs that are used for IKE administration and diagnosis: ikeadm(8) and ikecert(8).

The ikeadm(8) command can read the /etc/inet/ike/config file as a rule, then pass the configuration information to the running in.iked daemon using a doors interface.

example# ikeadm read rule /etc/inet/ike/config

Refreshing the ike smf(7) service provided to manage the in.iked daemon sends a SIGHUP signal to the in.iked daemon, which will (re)read /etc/inet/ike/config and reload the certificate database.

The preceding two commands have the same effect, that is, to update the running IKE daemon with the latest configuration. See "Service Management Facility" for more details on managing the in.iked daemon.

The IKE daemon (in.iked) is managed by the service management facility, smf(7). The following group of services manage the components of IPsec:

svc:/network/ipsec/ipsecalgs   (See ipsecalgs(8))
svc:/network/ipsec/policy      (See ipsecconf(8))
svc:/network/ipsec/manual-key  (See ipseckey(8))
svc:/network/ipsec/ike         (see ike.config(5))

The manual-key and ike services are delivered disabled because the system administrator must create configuration files for each service, as described in the respective man pages listed above.

The correct administrative procedure is to create the configuration file for each service, then enable each service using svcadm(8).

The ike service has a dependency on the ipsecalgs and policy services. These services should be enabled before the ike service. Failure to do so results in the ike service entering maintenance mode.

If the configuration needs to be changed, edit the configuration file then refresh the service, as follows:

example# svcadm refresh ike

The following properties are defined for the ike service:


Defines the level that ikeadm(8) invocations can change or observe the running in.iked. The acceptable values for this property are the same as those for the -p option. See the description of -p in OPTIONS.


Defines the configuration file to use. The default value is /etc/inet/ike/config. See ike.config(5) for the format of this file. This property has the same effect as the -f flag. See the description of -f in OPTIONS.


Defines the amount of debug output that is written to the debug_logfile file, described below. The default value for this is op or operator. This property controls the recording of information on events such as re-reading the configuration file. Acceptable value for debug_level are listed in the ikeadm(8) man page. The value all is equivalent to the -d flag. See the description of -d in OPTIONS.


Defines where debug output should be written. The messages written here are from debug code within in.iked. Startup error messages are recorded by the smf(7) framework and recorded in a service-specific log file. Use any of the following commands to examine the logfile property:

example# svcs -l ike
example# svcprop ike
example# svccfg -s ike listprop

The values for these log file properties might be different, in which case both files should be inspected for errors.


A boolean value that controls in.iked's behavior should the configuration file have syntax errors. The default value is false, which causes in.iked to enter maintenance mode if the configuration is invalid.

Setting this value to true causes the IKE service to stay online, but correct operation requires the administrator to configure the running daemon with ikeadm(8). This option is provided for compatibility with previous releases.

These properties can be modified using svccfg(8) by users who have been assigned the following authorization:


PKCS#11 token objects can be unlocked or locked by using ikeadm token login and ikeadm token logout, respectively. Availability of private keying material stored on these PKCS#11 token objects can be observed with: ikeadm dump certcache. The following authorizations allow users to log into and out of PKCS#11 token objects:

See auths(1), ikeadm(8), user_attr(5), rbac(7).

The service needs to be refreshed using svcadm(8) before a new property value is effective. General, non-modifiable properties can be viewed with the svcprop(1) command.

# svccfg -s ipsec/ike setprop config/config_file = \
# svcadm refresh ike

Administrative actions on this service, such as enabling, disabling, refreshing, and requesting restart can be performed using svcadm(8). A user who has been assigned the authorization shown below can perform these actions:


The service's status can be queried using the svcs(1) command.

The in.iked daemon is designed to be run under smf(7) management. While the in.iked command can be run from the command line, this is discouraged. If the in.iked command is to be run from the command line, the ike smf(7) service should be disabled first. See svcadm(8).

The following options are supported:


Check the syntax of a configuration file.


Use debug mode. The process stays attached to the controlling terminal and produces large amounts of debugging output. This option is deprecated. See "Service Management Facility" for more details.

-f filename

Use filename instead of /etc/inet/ike/config. See ike.config(5) for the format of this file. This option is deprecated. See "Service Management Facility" for more details.

-p level

Specify privilege level (level). This option sets how much ikeadm(8) invocations can change or observe about the running in.iked.

Valid levels are:


Base level


Access to preshared key info


Access to keying material

If -p is not specified, level defaults to 0.

This option is deprecated. See "Service Management Facility" for more details.

This program has sensitive private keying information in its image. Care should be taken with any core dumps or system dumps of a running in.iked daemon, as these files contain sensitive keying information. Use the coreadm(8) command to limit any corefiles produced by in.iked.


Default configuration file.


Private keys. A private key must have a matching public-key certificate with the same filename in /etc/inet/ike/publickeys/.


Public-key certificates. The names are only important with regard to matching private key names.


Public key certificate revocation lists.


IKE pre-shared secrets for Phase I authentication.

svcs(1), ipsecesp(4P), pf_key(4P), ike.config(5), attributes(7), smf(7), coreadm(8), ikeadm(8), ikecert(8), svcadm(8), svccfg(8)

Harkins, Dan and Carrel, Dave. RFC 2409, Internet Key Exchange (IKE). Network Working Group. November 1998.

Maughan, Douglas, Schertler, M., Schneider, M., Turner, J. RFC 2408, Internet Security Association and Key Management Protocol (ISAKMP). Network Working Group. November 1998.

Piper, Derrell, RFC 2407, The Internet IP Security Domain of Interpretation for ISAKMP. Network Working Group. November 1998.

January 27, 2009 OmniOS