USBA_HCDI_HUB_UPDATE(9E) Driver Entry Points USBA_HCDI_HUB_UPDATE(9E)

usba_hcdi_hub_update
USB HCD hub update entry point

#include <sys/usb/usba/hcdi.h>

int
prefix_hcdi_hub_update(usba_device_t *ud, uint8_t nports, uint8_t tt);

Volatile - illumos USB HCD private function

This is a private function that is not part of the stable DDI. It may be removed or changed at any time.

ud
Pointer to a USB device structure being updated. See usba_device(9S) for more information.
nports
The number of ports present on the hub.
tt
The value of the Think Time property as defined in the USB specification's hub descriptor.

The usba_hcdi_hub_update() entry point is an optional entry point for USB host controller drivers. It is used by some controllers to allow them to update information about a device in the controller after a device has been determined to be a hub during enumeration. If a host controller does not need to take any specific action after enumerating a hub, then it should simply set this entry point in the usba_hcdi_ops(9S) structure to NULL.

The nports and tt members provide relevant information from the device's hub class descriptor which can be used to help program the host controller. Any programming should be performed synchronously and be completed before this function returns.

This function will be called after usba_hcdi_device_init(9E) has been called. Any private data registered with that function will be available.

If this function fails, the enumeration of this device will fail, the hub driver will not attach to this USB device, and all devices plugged into this hub will not be detected by the system.

This function is called from kernel context only.

Upon successful completion, the usba_hcdi_hub_update() function should return USB_SUCCESS. Otherwise, it should return the appropriate USB error. If uncertain, use USB_FAILURE.

usba_hcdi_device_init(9E), usba_device(9S), usba_hcdi_ops(9S)
February 15, 2020 OmniOS