SASINFO(8) | Maintenance Commands and Procedures | SASINFO(8) |
sasinfo - Serial Attached SCSI HBA port command line interface
sasinfo hba [-v] [HBA_Name]...
sasinfo hba-port [-lvy] [-a HBA_Name] [HBA_port_nam]...
sasinfo expander [-vt] [-p HBA_port_Name] [Expander_SAS_Addr]...
sasinfo target-port [-s | -v] [Target_port_SAS_Addr]...
sasinfo logical-unit | lu [-v] [device_path]...
sasinfo [-V]
sasinfo [-?]
The sasinfo utility is a command line interface that collects administrative information on Serial Attached SCSI-2 (SAS-2) host bus adapter (HBA) that supports the Storage Management HBA API (SM-HBA). The utility reports attributes of HBA ports and of expander devices and SCSI target devices that might be connected to those HBA ports.
sasinfo is implemented as a set of subcommands, described below.
The following subcommands are supported by sasinfo.
hba
hba-port
expander
target-port
logical-unit | lu
The following options are supported.
-?, --help
-a, --hba HBA_Name
-l, --phy-linkstat
-p HBA_port_SAS_Addr, --port HBA_port_SAS_Addr
-s, --scsi
-v, --verbose
-V, --version
-y, --phy
Example 1 Listing All HBAs
The following command lists all HBAs on the host.
# sasinfo hba HBA Name: SUNW-pmcs-0 HBA Name: SUNW-pmcs-1
Example 2 Listing All HBAs with Details
The following command lists all HBAs on the host, along with related details. Note that each HBA has two HBA ports configured, with each HBA port connected to a storage device.
# sasinfo hba -v HBA Name: SUNW-pmcs-0
Manufacturer: sun
Model: SAS Gen-2
Firmware Version: 1.1
FCode/BIOS Version: 1.1
Serial Number: 111-11111
Driver Name: smvsl
Driver Version: 1.1
Number of HBA Ports: 2 HBA Name: SUNW-pmcs-1
Manufacturer: sun
Model: SAS Gen-2
Firmware Version: 1.1
FCode/BIOS Version: 1.1
Serial Number: 111-11111
Driver Name: smvsl
Driver Version: 1.1
Number of HBA Ports: 2
Example 3 Listing All HBA Ports
The following command lists all HBA ports on the host.
# sasinfo hba-port HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
HBA Port Name: /dev/cfg/c2 HBA Name: SUNW-pmcs-1
HBA Port Name: /dev/cfg/c3
HBA Port Name: /dev/cfg/c4
Example 4 Listing all HBA Ports with Details
The following command lists all HBA ports, with accompanying details.
# sasinfo hba-port -v HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
Type: sas-device
State: online
Local SAS Address: 5000c50000d756aa
Attached Port SAS Address: 50800201a5a502bf
Number of Phys: 4
HBA Port Name: /dev/cfg/c25000c50000d756cc
Type: sas-device
State: online
Local SAS Address: 5000c50000d756aa
Attached Port SAS Address: 50800201a5a503bf
Number of Phys: 4 HBA Name: SUNW-pmcs-1
HBA Port Name: /dev/cfg/c3
Type: sas-device
State: online
Local SAS Address: 5000c50000d756cc
Attached Port SAS Address: 50800201a5a504bf
Number of Phys: 4
HBA Port Name: /dev/cfg/c4
Type: sas-device
State: online
Local SAS Address: 5000c50000d756cc
Attached Port SAS Address: 50800201a5a505bf
Number of Phys: 4
Example 5 Listing phy Information for All HBA Ports
The following command lists phy information for all HBA ports.
# sasinfo hba-port -y HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
Phy Information:
Identifier: 0
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 1
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 2
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 3
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
HBA Port Name: /dev/cfg/c2
Phy Information:
Identifier: 4
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 5
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 6
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 7
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit HBA Name: SUNW-pmcs-1
HBA Port Name: /dev/cfg/c3
Phy Information:
Identifier: 0
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 1
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 2
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 3
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
HBA Port Name: /dev/cfg/c4
Phy Information:
Identifier: 4
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 5
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 6
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Identifier: 7
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Example 6 Listing phy Link Error Statistics for a Specific HBA Port
The following command lists phy link error statistics for a particular port.
# sasinfo hba-port -ly /dev/cfg/c1 HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
Phy Information:
Identifier: 0
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Link Error Statistics:
Invalid Dword: 0
Running Disparity Error: 0
Loss of Dword Sync: 0
Reset Problem: 0
Identifier: 1
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Link Error Statistics:
Invalid Dword: 0
Running Disparity Error: 0
Loss of Dword Sync: 0
Reset Problem: 0
Identifier: 2
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Link Error Statistics:
Invalid Dword: 0
Running Disparity Error: 0
Loss of Dword Sync: 0
Reset Problem: 0
Identifier: 3
State: enabled
HardwareLinkRate(Min/Max): 1.5Gbit/3Gbit
ProgrammedLinkRate(Min/Max): 1.5Gbit/3Gbit
NegotiatedLinkRate: 3Gbit
Link Error Statistics:
Invalid Dword: 0
Running Disparity Error: 0
Loss of Dword Sync: 0
Reset Problem: 0
Example 7 Listing Expanders Connected to an HBA Port
The following command lists all expanders that are visible through the specified HBA port.
# sasinfo expander -p /dev/cfg/c1 HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
Expander SAS Address(Tier 1): 50800201a5a502bf
Expander SAS Address(Tier 2): 50800201a5a50233
Expander SAS Address(Tier 2); 5000c5000d2da812
Expander SAS Address(Tier 1): 50800201a5a503bf
Expander SAS Address(Tier 2): 50800201a5a502d2
Expander SAS Address(Tier 2); 5000c5000d2da823
Example 8 Listing Detailed Information on Expanders
The following command lists detailed information on all expanders that are visible through the specified HBA port.
# sasinfo expander -v -p /dev/cfg/c1 HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
Expander SAS Address(Tier 1): 50800201a5a502bf
OS Device Name: /dev/smp/expd0
State: online
Expander SAS Address(Tier 2): 50800201a5a50233
OS Device Name: /dev/smp/expd2
State: online
Expander SAS Address(Tier 2); 5000c5000d2da812
OS Device Name: /dev/smp/expd3
State: online
Expander SAS Address(Tier 1): 50800201a5a503bf
OS Device Name: /dev/smp/expd1
State: online
Expander SAS Address(Tier 2): 50800201a5a502d2
OS Device Name: /dev/smp/expd3
State: online
Expander SAS Address(Tier 2); 5000c5000d2da823
OS Device Name: /dev/smp/expd4
State: online
Example 9 Listing Target Ports Attached to Expanders
The following command lists all target ports that are attached to expanders connected to a specified HBA port.
# sasinfo expander -t -p /dev/cfg/c1 HBA Name: SUNW-pmcs-0
HBA Port Name: /dev/cfg/c1
Expander SAS Address(Tier 1): 50800201a5a502bf
Target Port SAS Address: 50800201a5a504f1
Expander SAS Address(Tier 2): 50800201a5a50233
Target Port SAS Address: 50800201a5a502be
Target Port SAS Address: 5000c5000d2da8b2
Expander SAS Address(Tier 2); 5000c5000d2da812
Target Port SAS Address: 50800201a5a502be
Target Port SAS Address: 50800201a5a508b2
Expander SAS Address(Tier 1): 50800201a5a503bf
Target Port SAS Address: 50800201a5a50421
Expander SAS Address(Tier 2): 50800201a5a502d2
Target Port SAS Address: 50800201a5a503be
Target Port SAS Address: 5000c5000d2da7be
Expander SAS Address(Tier 2); 5000c5000d2da823
Target Port SAS Address: 50800201a5a503be
Target Port SAS Address: 5000c5000d2da7be
Example 10 Listing Target Port Information
The following command lists all target ports discovered on the host.
# sasinfo target-port Target Port SAS Address: 5000c5000bae4009 Target Port SAS Address: 5000c5000baef4b1 Target Port SAS Address: 5000c5000bae3fe1 Target Port SAS Address: 5000c5000bae49d9 Target Port SAS Address: 5000c5000bae36c5
Example 11 Listing Target Port Information with Topology Details
The following command lists all target ports with the HBA port and expander that they are connected to.
# sasinfo target-port -v Target Port SAS Address: 5000c5000bae4009
Type: SAS Device
HBA Port Name: /dev/cfg/c7
Expander Device SAS Address: 500e004aaaaaaa3f
HBA Port Name: /dev/cfg/c5
Expander Device SAS Address: 500e004aaaaaaa3f Target Port SAS Address: 5000c5000baef4b1
Type: SAS Device
HBA Port Name: /dev/cfg/c7
Expander Device SAS Address: 500e004aaaaaaa3f
HBA Port Name: /dev/cfg/c5
Expander Device SAS Address: 500e004aaaaaaa3f Target Port SAS Address: 5000c5000bae3fe1
Type: SAS Device
HBA Port Name: /dev/cfg/c7
Expander Device SAS Address: 500e004aaaaaaa3f
HBA Port Name: /dev/cfg/c5
Expander Device SAS Address: 500e004aaaaaaa3f Target Port SAS Address: 5000c5000bae49d9
Type: SAS Device
HBA Port Name: /dev/cfg/c7
Expander Device SAS Address: 500e004aaaaaaa3f
HBA Port Name: /dev/cfg/c5
Expander Device SAS Address: 500e004aaaaaaa3f Target Port SAS Address: 5000c5000bae36c5
Type: SAS Device
HBA Port Name: /dev/cfg/c7
Expander Device SAS Address: 500e004aaaaaaa3f
HBA Port Name: /dev/cfg/c5
Expander Device SAS Address: 500e004aaaaaaa3f
Example 12 Listing Target Ports with SCSI Information
The following command lists all target port details, including SCSI information for each target port.
# sasinfo target-port -s 5000c5000bae4009 Target Port SAS Address: 5000c5000bae4009
Type: SAS Device
HBA Port Name: /dev/cfg/c7
Expander Device SAS Address: 500e004aaaaaaa3f
LUN : 0
OS Device Name : /dev/rdsk/c6t5000C5000BAE400Bd0s2
Vendor: Sun
Product: J4400
Device Type: Disk
HBA Port Name: /dev/cfg/c5
Expander Device SAS Address: 500e004aaaaaaa3f
LUN : 0
OS Device Name : /dev/rdsk/c6t5000C5000BAE400Bd0s2
Vendor: Sun
Product: J4400
Device Type: Disk
Example 13 Listing the Logical Units
The following command lists the logical units on a host.
# sasinfo logical-unit OS Device Name: /dev/rdsk/c4t50020F2300B4904Ed0s2 OS Device Name: /dev/rdsk/c4t50020F230000B4AFd0s2
Example 14 Listing Additional Information on Logical Units
The following command displays additional logical unit information using the -v option for device /dev/rmt/On.
# sasinfo lu -v OS Device Name: /dev/rdsk/c4t50020F2300B4904Ed0s2
HBA Port Name: /dev/cfg/c1
Target Port SAS Address: 50020f2300b4904e
LUN: 0
Vendor: Sun
Product: J4400
Device Type: Disk OS Device Name: /dev/rdsk/c4t50020F230000B4AFd0s2
HBA Port Name: /dev/cfg/c1
Target Port SAS Address: 50020f230063100b
LUN: 0
Vendor: Sun
Product: J4400
Device Type: Disk
See attributes(7) for descriptions of the following attributes:
ATTRIBUTE TYPE | ATTRIBUTE VALUE |
Interface Stability | Committed |
April 9, 2016 | OmniOS |