ICL_EVENTS(3CPC) CPU Performance Counters Library Functions ICL_EVENTS(3CPC)

icl_events — processor model specific performance counter events

This manual page describes events specific to the following Intel CPU models and is derived from Intel's perfmon data. For more information, please consult the Intel Software Developer's Manual or Intel's perfmon website.

CPU models described by this document:

The following events are supported:

Counts the number of times where store forwarding was prevented for a load operation. The most common case is a load blocked due to the address of memory access (partially) overlapping with a preceding uncompleted store. Note: See the table of not supported store forwards in the Optimization Guide.
Counts the number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.
Counts the number of times a load got blocked due to false dependencies in MOB due to partial compare on address.
Counts completed page walks (4K sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.
Counts completed page walks (2M/4M sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.
Counts completed page walks (all page sizes) caused by demand data loads. This implies it missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.
Counts the number of page walks outstanding for a demand load in the PMH (Page Miss Handler) each cycle.
Counts cycles when at least one PMH (Page Miss Handler) is busy with a page walk for a demand load.
Counts loads that miss the DTLB (Data TLB) and hit the STLB (Second level TLB).
Counts core cycles when the Resource allocator was stalled due to recovery from an earlier branch misprediction or machine clear event.
Counts cycles the Backend cluster is recovering after a miss-speculation or a Store Buffer or Load Buffer drain stall.
Estimated number of Top-down Microarchitecture Analysis slots that got dropped due to non front-end reasons
Cycles after recovery from a branch misprediction or machine clear till the first uop is issued from the resteered path.
Counts the number of uops that the Resource Allocation Table (RAT) issues to the Reservation Station (RS).
Counts cycles during which the Resource Allocation Table (RAT) does not issue any Uops to the reservation station (RS) for the current thread.
Counts cycles when divide unit is busy executing divide or square root operations. Accounts for integer and floating-point operations.
Counts the number of demand Data Read requests that miss L2 cache. Only not rejected loads are counted.
Counts the RFO (Read-for-Ownership) requests that miss L2 cache.
Counts L2 cache misses when fetching instructions.
Counts demand requests that miss L2 cache.
Counts Software prefetch requests that miss the L2 cache. This event accounts for PREFETCHNTA and PREFETCHT0/1/2 instructions.
Counts the number of demand Data Read requests initiated by load instructions that hit L2 cache.
Counts the RFO (Read-for-Ownership) requests that hit L2 cache.
Counts L2 cache hits when fetching instructions, code reads.
Counts Software prefetch requests that hit the L2 cache. This event accounts for PREFETCHNTA and PREFETCHT0/1/2 instructions.
Counts the number of demand Data Read requests (including requests from L1D hardware prefetchers). These loads may hit or miss L2 cache. Only non rejected loads are counted.
Counts the total number of RFO (read for ownership) requests to L2 cache. L2 RFO requests include both L1D demand RFO misses as well as L1D RFO prefetches.
Counts the total number of L2 code requests.
Counts demand requests to L2 cache.
Counts Core cycles where the core was running with power-delivery for baseline license level 0. This includes non-AVX codes, SSE, AVX 128-bit, and low-current AVX 256-bit codes.
Counts Core cycles where the core was running with power-delivery for license level 1. This includes high current AVX 256-bit instructions as well as low current AVX 512-bit instructions.
Core cycles where the core was running with power-delivery for license level 2 (introduced in Skylake Server microarchtecture). This includes high current AVX 512-bit instructions.
Counts core-originated cacheable requests that miss the L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches from L1 and L2. It does not include all misses to the L3.
Counts the number of PREFETCHNTA instructions executed.
Counts the number of PREFETCHT0 instructions executed.
Counts the number of PREFETCHT1 or PREFETCHT2 instructions executed.
Counts the number of PREFETCHW instructions executed.
This is an architectural event that counts the number of thread cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. The core frequency may change from time to time due to power or thermal throttling. For this reason, this event may have a changing ratio with regards to wall clock time.
Counts core crystal clock cycles when the thread is unhalted.
Counts Core crystal clock cycles when current thread is unhalted and the other thread is halted.
This event distributes Core crystal clock cycle counts between active hyperthreads, i.e., those in C0 sleep-state. A hyperthread becomes inactive when it executes the HLT or MWAIT instructions. If one thread is active in a core, all counts are attributed to this hyperthread. To obtain the full count when the Core is active, sum the counts from each hyperthread.
Counts number of L1D misses that are outstanding in each cycle, that is each cycle the number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch. Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.
Counts duration of L1D miss outstanding in cycles.
Counts number of cycles a demand request has waited due to L1D Fill Buffer (FB) unavailablability. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.
Counts number of phases a demand request has waited due to L1D Fill Buffer (FB) unavailablability. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.
Counts number of cycles a demand request has waited due to L1D due to lack of L2 resources. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.
Counts completed page walks (4K sizes) caused by demand data stores. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.
Counts completed page walks (2M/4M sizes) caused by demand data stores. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.
Counts completed page walks (all page sizes) caused by demand data stores. This implies it missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.
Counts the number of page walks outstanding for a store in the PMH (Page Miss Handler) each cycle.
Counts cycles when at least one PMH (Page Miss Handler) is busy with a page walk for a store.
Counts stores that miss the DTLB (Data TLB) and hit the STLB (2nd Level TLB).
Counts all not software-prefetch load dispatches that hit the fill buffer (FB) allocated for the software prefetch. It can also be incremented by some lock instructions. So it should only be used with profiling so that the locks can be excluded by ASM (Assembly File) inspection of the nearby instructions.
Counts L1D data line replacements including opportunistic replacements, and replacements that require stall-for-replace or block-for-replace.
Counts the number of times a TSX line had a cache conflict.
Speculatively counts the number of Transactional Synchronization Extensions (TSX) aborts due to a data capacity limitation for transactional writes.
Counts the number of times a TSX Abort was triggered due to a non-release/commit store to lock.
Counts the number of times a TSX Abort was triggered due to commit but Lock Buffer not empty.
Counts the number of times a TSX Abort was triggered due to release/commit but data and address mismatch.
Counts the number of times a TSX Abort was triggered due to attempting an unsupported alignment from Lock Buffer.
Counts the number of times we could not allocate Lock Buffer.
Speculatively counts the number of Transactional Synchronization Extensions (TSX) aborts due to a data capacity limitation for transactional reads
Counts Unfriendly TSX abort triggered by a vzeroupper instruction.
Counts Unfriendly TSX abort triggered by a nest count that is too deep.
Counts cycles during which the reservation station (RS) is empty for this logical processor. This is usually caused when the front-end pipeline runs into stravation periods (e.g. branch mispredictions or i-cache misses)
Counts end of periods where the Reservation Station (RS) was empty. Could be useful to closely sample on front-end latency issues (see the FRONTEND_RETIRED event of designated precise events)
Counts the number of off-core outstanding Demand Data Read transactions every cycle. A transaction is considered to be in the Off-core outstanding state between L2 cache miss and data-return to the core.
Counts the number of off-core outstanding read-for-ownership (RFO) store transactions every cycle. An RFO transaction is considered to be in the Off-core outstanding state between L2 cache miss and transaction completion.
Counts the number of offcore outstanding demand rfo Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.
Counts the number of offcore outstanding cacheable Core Data Read transactions in the super queue every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.
Counts cycles when offcore outstanding cacheable Core Data Read transactions are present in the super queue. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.
Cycles with at least 1 Demand Data Read requests who miss L3 cache in the superQ.
Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).
Counts the number of cycles where optimal number of uops was delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).
Counts the number of cycles uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).
Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path.
Counts the number of cycles where optimal number of uops was delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).
Counts the number of cycles uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path.
Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.
Counts the total number of uops delivered by the Microcode Sequencer (MS). Any instruction over 4 uops will be delivered by the MS. Some instructions such as transcendentals may additionally generate uops from the MS.
Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.
Counts cycles where a code line fetch is stalled due to an L1 instruction cache miss. The legacy decode pipeline works at a 16 Byte granularity.
Counts instruction fetch tag lookups that hit in the instruction cache (L1I). Counts at 64-byte cache-line granularity. Accounts for both cacheable and uncacheable accesses.
Counts instruction fetch tag lookups that miss in the instruction cache (L1I). Counts at 64-byte cache-line granularity. Accounts for both cacheable and uncacheable accesses.
Counts cycles where a code fetch is stalled due to L1 instruction cache tag miss.
Counts completed page walks (4K page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.
Counts completed page walks (2M/4M page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.
Counts completed page walks (all page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.
Counts the number of page walks outstanding for an outstanding code (instruction fetch) request in the PMH (Page Miss Handler) each cycle.
Counts cycles when at least one PMH (Page Miss Handler) is busy with a page walk for a code (instruction fetch) request.
Counts instruction fetch requests that miss the ITLB (Instruction TLB) and hit the STLB (Second-level TLB).
Counts cycles that the Instruction Length decoder (ILD) stalls occurred due to dynamically changing prefix length of the decoded instruction (by operand size prefix instruction 0x66, address size prefix instruction 0x67 or REX.W for Intel64). Count is proportional to the number of prefixes in a 16B-line. This may result in a three-cycle penalty for each LCP (Length changing prefix) in a 16-byte chunk.
Counts the number of uops not delivered to by the Instruction Decode Queue (IDQ) to the back-end of the pipeline when there was no back-end stalls. This event counts for one SMT thread in a given cycle.
Counts the number of cycles when no uops were delivered by the Instruction Decode Queue (IDQ) to the back-end of the pipeline when there was no back-end stalls. This event counts for one SMT thread in a given cycle.
Counts the number of cycles when the optimal number of uops were delivered by the Instruction Decode Queue (IDQ) to the back-end of the pipeline when there was no back-end stalls. This event counts for one SMT thread in a given cycle.
Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 0.
Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 1.
Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to ports 2 and 3.
Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to ports 5 and 9.
Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 5.
Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 6.
Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to ports 7 and 8.
Counts cycles where the pipeline is stalled due to serializing operations.
Counts allocation stall cycles caused by the store buffer (SB) being full. This counts cycles that the pipeline back-end blocked uop delivery from the front-end.
Cycles while L2 cache miss demand load is outstanding.
Cycles while L3 cache miss demand load is outstanding.
Total execution stalls.
Execution stalls while L2 cache miss demand load is outstanding.
Execution stalls while L3 cache miss demand load is outstanding.
Cycles while L1 cache miss demand load is outstanding.
Execution stalls while L1 cache miss demand load is outstanding.
Cycles while memory subsystem has an outstanding load.
Execution stalls while memory subsystem has an outstanding load.
Counts the number of available slots for an unhalted logical processor. The event increments by machine-width of the narrowest pipeline as employed by the Top-down Microarchitecture Analysis method. The count is distributed among unhalted logical processors (hyper-threads) who share the same physical core.
Counts the number of Top-down Microarchitecture Analysis (TMA) method's slots where no micro-operations were being issued from front-end to back-end of the machine due to lack of back-end resources.
Number of TMA slots that were wasted due to incorrect speculation by branch mispredictions. This event estimates number of operations that were issued but not retired from the specualtive path as well as the out-of-order engine recovery past a branch misprediction.
Counts cycles during which a total of 1 uop was executed on all ports and Reservation Station (RS) was not empty.
Counts cycles during which a total of 2 uops were executed on all ports and Reservation Station (RS) was not empty.
Cycles total of 3 uops are executed on all ports and Reservation Station (RS) was not empty.
Cycles total of 4 uops are executed on all ports and Reservation Station (RS) was not empty.
Counts cycles where the Store Buffer was full and no loads caused an execution stall.
Counts cycles during which no uops were executed on all ports and Reservation Station (RS) was not empty.
Counts the number of uops delivered to the back-end by the LSD(Loop Stream Detector).
Counts the cycles when at least one uop is delivered by the LSD (Loop-stream detector).
Counts the cycles when optimal number of uops is delivered by the LSD (Loop-stream detector).
Decode Stream Buffer (DSB) is a Uop-cache that holds translations of previously fetched instructions that were decoded by the legacy x86 decode pipeline (MITE). This event counts fetch penalty cycles when a transition occurs from DSB to MITE.
Counts the number of Decode Stream Buffer (DSB a.k.a. Uop Cache)-to-MITE speculative transitions.
Counts the Demand Data Read requests sent to uncore. Use it in conjunction with OFFCORE_REQUESTS_OUTSTANDING to determine average latency in the uncore.
Counts the demand RFO (read for ownership) requests including regular RFOs, locks, ItoM.
Counts the demand and prefetch data reads. All Core Data Reads include cacheable 'Demands' and L2 prefetchers (not L3 prefetchers). Counting also covers reads due to page walks resulted from any request type.
Demand Data Read requests who miss L3 cache.
Counts memory transactions reached the super queue including requests initiated by the core, all L3 prefetches, page walks, etc..
Counts the number of uops to be executed per-thread each cycle.
Counts cycles during which no uops were dispatched from the Reservation Station (RS) per thread.
Cycles where at least 1 uop was executed per-thread.
Cycles where at least 2 uops were executed per-thread.
Cycles where at least 3 uops were executed per-thread.
Cycles where at least 4 uops were executed per-thread.
Counts the number of uops executed from any thread.
Counts cycles when at least 1 micro-op is executed from any thread on physical core.
Counts cycles when at least 2 micro-ops are executed from any thread on physical core.
Counts cycles when at least 3 micro-ops are executed from any thread on physical core.
Counts cycles when at least 4 micro-ops are executed from any thread on physical core.
Counts the number of x87 uops executed.
Counts the number of DTLB flush attempts of the thread-specific entries.
Counts the number of any STLB flush attempts (such as entire, VPID, PCID, InvPage, CR3 write, etc.).
Counts the number of X86 instructions retired - an Architectural PerfMon event. Counting continues during hardware interrupts, traps, and inside interrupt handlers. Notes: INST_RETIRED.ANY is counted by a designated fixed counter freeing up programmable counters to count other events. INST_RETIRED.ANY_P is counted by a programmable counter.
This event counts cycles without actually retired instructions.
Counts all microcode Floating Point assists.
Counts the number of occurrences where a microcode assist is invoked by hardware Examples include AD (page Access Dirty), FP and AVX related assists.
This event counts cycles without actually retired uops.
Counts the number of cycles using always true condition (uops_ret < 16) applied to non PEBS uops retired event.
Counts the retirement slots used each cycle.
Counts the number of machine clears (nukes) of any type.
Counts the number of Machine Clears detected dye to memory ordering. Memory Ordering Machine Clears may apply when a memory read may not conform to the memory ordering rules of the x86 architecture
Counts self-modifying code (SMC) detected, which causes a machine clear.
Counts all branch instructions retired.
Counts taken conditional branch instructions retired.
Counts both direct and indirect near call instructions retired.
Counts return instructions retired.
Counts not taken branch instructions retired.
Counts conditional branch instructions retired.
Counts taken branch instructions retired.
Counts far branch instructions retired.
Counts all indirect branch instructions retired (excluding RETs. TSX aborts is considered indirect branch).
Counts all the retired branch instructions that were mispredicted by the processor. A branch misprediction occurs when the processor incorrectly predicts the destination of the branch. When the misprediction is discovered at execution, all the instructions executed in the wrong (speculative) path must be discarded, and the processor must start fetching from the correct path.
Counts taken conditional mispredicted branch instructions retired.
Counts retired mispredicted indirect (near taken) CALL instructions, including both register and memory indirect.
Counts the number of conditional branch instructions retired that were mispredicted and the branch direction was not taken.
Counts mispredicted conditional branch instructions retired.
Counts number of near branch instructions retired that were mispredicted and taken.
Counts all miss-predicted indirect branch instructions retired (excluding RETs. TSX aborts is considered indirect branch).
Counts number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.
Counts number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.
Counts number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.
Counts number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.
Counts number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.
Counts number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.
Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.
Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.
Counts the number of times we entered an HLE region. Does not count nested transactions.
Counts the number of times HLE commit succeeded.
Counts the number of times HLE abort was triggered.
Counts the number of times an HLE execution aborted due to various memory events (e.g., read/write capacity and conflicts).
Counts the number of times an HLE execution aborted due to HLE-unfriendly instructions and certain unfriendly events (such as AD assists etc.).
Counts the number of times an HLE execution aborted due to unfriendly events (such as interrupts).
Counts the number of times we entered an RTM region. Does not count nested transactions.
Counts the number of times RTM commit succeeded.
Counts the number of times RTM abort was triggered.
Counts the number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts).
Counts the number of times an RTM execution aborted due to HLE-unfriendly instructions.
Counts the number of times an RTM execution aborted due to incompatible memory type.
Counts the number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt).
Increments when an entry is added to the Last Branch Record (LBR) array (or removed from the array in case of RETURNs in call stack mode). The event requires LBR enable via IA32_DEBUGCTL MSR and branch type selection via MSR_LBR_SELECT.
Counts number of retired PAUSE instructions. This event is not supported on first SKL and KBL products.
Counts retired load instructions that true miss the STLB.
Counts retired store instructions that true miss the STLB.
Counts retired load instructions with locked access.
Counts retired load instructions that split across a cacheline boundary.
Counts retired store instructions that split across a cacheline boundary.
Counts all retired load instructions. This event accounts for SW prefetch instructions for loads.
Counts all retired store instructions. This event account for SW prefetch instructions and PREFETCHW instruction for stores.
Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.
Counts retired load instructions with L2 cache hits as data sources.
Counts retired load instructions with at least one uop that hit in the L3 cache.
Counts retired load instructions with at least one uop that missed in the L1 cache.
Counts retired load instructions missed L2 cache as data sources.
Counts retired load instructions with at least one uop that missed in the L3 cache.
Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready.
Counts the retired load instructions whose data sources were L3 hit and cross-core snoop missed in on-pkg core cache.
Counts retired load instructions whose data sources were L3 and cross-core snoop hits in on-pkg core cache.
Counts retired load instructions whose data sources were HitM responses from shared L3.
Counts retired load instructions whose data sources were hits in L3 without snoops required.
Counts the number of times the front-end is resteered when it finds a branch instruction in a fetch line. This occurs for the first time a branch instruction is fetched or when the branch is not tracked by the BPU (Branch Prediction Unit) anymore.
This event distributes cycle counts between active hyperthreads, i.e., those in C0. A hyperthread becomes inactive when it executes the HLT or MWAIT instructions. If all other hyperthreads are inactive (or disabled or do not exist), all counts are attributed to this hyperthread. To obtain the full count when the Core is active, sum the counts from each hyperthread.
Counts L2 writebacks that access L2 cache.
Counts the number of L2 cache lines filling the L2. Counting does not cover rejects.
Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared or Exclusive state. A non-threaded event.
Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines are in Modified state. Modified lines are written back to L3
Counts the number of cache lines that have been prefetched by the L2 hardware prefetcher but not used by demand access when evicted from the L2 cache
Counts the cycles for which the thread is active and the superQ cannot take any more entries.

cpc(3CPC)

https://download.01.org/perfmon/index/

June 18, 2018 OmniOS