svc.startd is the master restarter daemon for Service Management Facility
(SMF) and the default restarter for all services. svc.startd starts,
stops, and restarts services based on administrative requests, system
failures, or application failures.
svc.startd maintains service state, as well as being
responsible for managing faults in accordance with the dependencies of each
svc.startd is invoked automatically during system startup.
It is restarted if any failures occur. svc.startd should never be
See smf_restarter(5) for information on configuration and
behavior common to all restarters.
svcs(1) reports status for all services managed by the
Service Configuration Facility. svcadm(1M) allows manipulation of
service instances with respect to the service's restarter.
Environment variables with the "SMF_" prefix are reserved and may be
svc.startd supplies the "SMF_" environment
variables specified in smf_method(5) to the method. PATH is set to
"/usr/sbin:/usr/bin" by default. By default, all other
environment variables supplied to svc.startd are those inherited from
Duplicate entries are reduced to a single entry. The value used is
undefined. Environment entries that are not prefixed with
"<name>=" are ignored.
svc.startd is not configured by command line options. Instead,
configuration is read from the service configuration repository. You can use
svccfg(1M) to set all options and properties.
The following configuration variables in the options
property group are available to developers and administrators:
(as defined in
; see scf_value_is_type(3SCF)
) that describes
the default level of messages to print to the console during boot. The
supported message options include quiet
option prints minimal messages to console during boot. The
option prints a single message per service started to indicate
success or failure. You can use the boot -m
option to override
setting at boot time. See kernel(1M)
Control the level of global service logging for
. An astring
(as defined in scf_value_is_type
) that describes the default level of
messages to log to syslog
's global logfile, /var/svc/log/svc.startd.log
supported message options include quiet
. The quiet
option sends error messages requiring
administrative intervention to the console, syslog
's global logfile. The verbose
option sends error
messages requiring administrative intervention to the console, syslog
's global logfile, and information about errors which do
not require administrative intervention to svc.startd
's global logfile.
A single message per service started is also sent to the console. The
option sends svc.startd
debug messages to
's global logfile, error messages requiring administrative
intervention to the console, syslog
logfile, and a single message per service started to the console.
An FMRI which determines the milestone used as the
default boot level. Acceptable options include only the major milestones:
or the special values all or none. all
represents an idealized milestone that depends on every service. none
is a special milestone where no services are running apart from the master
svc:/system/svc/restarter:default. By default, svc.startd uses
all, a synthetic milestone that depends on every service. If this
property is specified, it overrides any initdefault setting in
Indicates that a reconfiguration reboot has been
requested. Services with actions that must key off of a reconfiguration reboot
may check that this property exists and is set to 1 to confirm a
reconfiguration boot has been requested.
This property is managed by svc.startd and should not be
modified by the administrator.
Configuration errors, such as disabling svc.startd are
logged by syslog, but ignored.
Services managed by svc.startd can appear in any of the states described
in smf(5). The state definitions are unmodified by this restarter.
In addition to any logging done by the managed service, svc.startd
provides a common set of service reporting and logging mechanisms.
Reporting properties svc.startd updates a common set of
properties on all services it manages. These properties are a common
interface that can be used to take action based on service instance health.
The svcs(1) command can be used to easily display these
The current and next (if currently in transition) state
for an instance.
A caption detailing additional information about the
current instance state. The auxiliary state available for services managed by
The time when the current state was reached.
The primary process contract ID, if any, that under which
the service instance is executing.
By default, svc.startd provides logging of significant
restarter actions for the service as well as method standard output and
standard error file descriptors to
/var/svc/log/service:instance.log. The level of logging
to system global locations like /var/svc/log/svc.startd.log and
syslog is controlled by the options/logging property.
When developing or configuring a service managed by svc.startd, a common
set of properties are used to affect the interaction between the service
instance and the restarter.
The general form of methods for the fork/exec model provided by
svc.startd are presented in smf_method(5). The following
methods are supported as required or optional by services managed by
Reload any appropriate configuration parameters from the
repository or config
file, without interrupting service. This is often
implemented using SIGHUP
for system daemons. If the service is unable
to recognize configuration changes without a restart, no refresh method is
This method is optional.
Start the service. Return success only after the
application is available to consumers. Fail if a conflicting instance is
already running, or if the service is unable to start.
This method is required.
Stop the service. In some cases, the stop method can be
invoked when some or all of the service has already been stopped. Only return
an error if the service is not entirely stopped on method return.
This method is required.
If the service does not need to take any action in a required
method, it must specify the :true token for that method.
svc.startd honors any method context specified for the
service or any specific method. The method expansion tokens described in
smf_method(5) are available for use in all methods invoked by
An overview of the general properties is available in
smf(5). The specific way in which these general properties interacts
with svc.startd follows:
If enabled is set to true, the restarter attempts to
start the service once all its dependencies are satisfied. If set to false,
the service remains in the disabled state, not running.
If this FMRI property is empty or set to
svc:/system/svc/restarter:default, the service is managed by
svc.startd. Otherwise, the restarter specified is responsible (once it
is available) for managing the service.
This was originally supposed to ensure that only one
service instance could be in online or degraded state at once; however, it was
never implemented, and is often incorrectly specified in multi-instance
manifests. As such, it should be considered obsolete and not specified in new
Additionally, svc.startd managed services can define the
optional properties listed below in the startd property group.
The critical_failure_count and
critical_failure_period properties together specify the maximum number
of service failures allowed in a given time interval before svc.startd
transitions the service to maintenance. If the number of failures exceeds
critical_failure_count in any period of critical_failure_period
seconds, svc.startd will transition the service to maintenance.
The duration property defines the service's model.
It can be set to transient, child also known as
"wait" model services, or contract (the
The ignore_error property, if set, specifies a
comma-separated list of ignored events. Legitimate string values in that list
are core and signal. The default is to restart on all
The need_session property, if set to true,
indicates that the instance should be launched in its own session. The default
is not to do so.
The utmpx_prefix string property defines that the
instance requires a valid utmpx entry prior to start method execution.
The default is not to create a utmpx entry.
svc.startd assumes that a method has failed if it returns a non-zero exit
code or if fails to complete before the timeout specified expires. If
$SMF_EXIT_ERR_CONFIG or $SMF_EXIT_ERR_FATAL is returned,
svc.startd immediately places the service in the maintenance state. For
all other failures, svc.startd places the service in the offline state.
If a service is offline and its dependencies are satisfied, svc.startd
tries again to start the service (see smf(5)).
If a contract or transient service does not return from its start
method before its defined timeout elapses, svc.startd sends a
SIGKILL to the method, and returns the service to the offline
If three failures happen in a row, or if the service is restarting
more than once a second, svc.startd places the service in the
The conditions of service failure are defined by a combination of
the service model (defined by the startd/duration property) and the
value of the startd/ignore_error property.
A contract model service fails if any of the following conditions
- all processes in the service exit
- any processes in the service produce a core dump
- a process outside the service sends a service process a fatal signal (for
example, an administrator terminates a service process with the
The last two conditions may be ignored by the service by
specifying core and/or signal in startd/ignore_error.
Defining a service as transient means that svc.startd does
not track processes for that service. Thus, the potential faults described
for contract model services are not considered failures for transient
services. A transient service only enters the maintenance state if one of
the method failure conditions occurs.
"Wait" model services are restarted whenever the
child process associated with the service exits. A child process that exits
is not considered an error for "wait" model services, and
repeated failures do not lead to a transition to maintenance state. However,
a wait service which is repeatedly exiting with an error that exceeds the
default rate (5 failures/second) will be throttled back so that the service
only restarts once per second.
svc.startd continues to provide support for services invoked during the
startup run level transitions. Each /etc/rc?.d directory is processed
after all managed services which constitute the equivalent run level milestone
have transitioned to the online state. Standard init scripts placed in
the /etc/rc?.d directories are run in the order of their sequence
The milestone to run-level mapping is:
Multi-user with network services (3)
Additionally, svc.startd gives these legacy services
visibility in SMF by inserting an instance per script into the repository.
These legacy instances are visible using standard SMF interfaces such as
svcs(1), always appear in the LEGACY-RUN state, cannot be
modified, and can not be specified as dependencies of other services. The
initial start time of the legacy service is captured as a convenience for